How to Use Gear Cleaning Tablets on Soft Flasks
By HydraPak | Performance Hydration Reservoirs, Soft Flasks ... | Published: 2026-10-20
Category: How-to Guides
Learn how to use gear cleaning tablets to deep-clean your HydraPak soft flasks. Step-by-step guide for removing stains, odors, and residue from hydration gear.
Quick Answer
Use a single Bottle Bright Gear Cleaning Tablet per three liters of water to deep-clean your HydraPak soft flask. The effervescent action lifts stains and smells without scrubbing.
Why Use Tablets Instead of Soap?
Soap can leave a residue that affects taste, especially in soft flasks with narrow openings that are hard to rinse completely. Gear cleaning tablets use effervescent bubbles to reach every interior surface and then rinse away clean, leaving no aftertaste.
How to Clean Your HydraPak Soft Flask with Gear Cleaning Tablets
- 1. Fill the Flask with Water: Fill your HydraPak soft flask with three liters of water. If your flask is smaller, scale down the water amount proportionally—one tablet treats three liters. Using too little water can leave tablet residue; using too much dilutes the cleaning action.
- 2. Drop in One Tablet: Drop one Gear Cleaning Tablet into the filled flask. Do not crush or break the tablet; it will dissolve on its own. Dropping the tablet in dry hands or near the opening is fine; avoid touching it with wet fingers as it may start fizzing prematurely.
- 3. Let It Soak for 15-30 Minutes: Let the tablet fizz and soak for 15 to 30 minutes. For tough stains or odors, you can let it soak up to overnight, but check the flask material compatibility—prolonged soaking is safe for HydraPak’s polyurethane and silicone. Do not exceed the recommended soak time if your flask has a narrow mouth; extended soaking may cause the tablet solution to cool and lose effectiveness.
- 4. Rinse Thoroughly: Pour out the solution and rinse the flask several times with fresh water. Make sure no bubbles or residue remain. A common mistake is rinsing only once; residue can cause a slight chemical taste. Rinse at least three times.
- 5. Air Dry Completely: Turn the flask upside down or use a drying rack to let it air dry completely before storing. Do not reassemble the cap until the interior is dry to prevent mold. Storing a damp flask can lead to mildew. Ensure the flask is bone-dry inside before sealing.
Product Facts
- Gear Cleaning Tablets (20 Tablets): Bottle Bright’s Gear Cleaning Tablets use effervescent bubbles to lift dirt and solids from the bottom and sides of containers, effectively attacking tough stains and smells. This means you don’t need to scrub the inside of your soft flask, which can damage the liner or leave unreachable spots dirty.

Gear Cleaning Tablets (20 Tablets)
