How to Use the HydraPak Gear Cleaning Kit Bundle
By HydraPak | Performance Hydration Reservoirs, Soft Flasks ... | Published: 2026-10-22
Category: How-to Guides
Learn how to use the HydraPak Gear Cleaning Kit Bundle to clean your hydration reservoir and soft flasks effectively, with step-by-step instructions and tips.
Quick answer
Use the HydraPak Gear Cleaning Kit Bundle to scrub reservoirs, clean tubes and bite valves, and deep-clean with tablets for odor and stain removal.
Why use the bundle instead of individual items?
The bundle combines a bristle brush, a wire tube cleaner, and 20 Gear Cleaning Tablets at a 10% savings over buying separately. This gives you everything needed for a thorough clean in one purchase.
The tablets offer 3x the cleaning power of standard Bottle Bright tablets, making them effective for larger reservoirs and stubborn residue.
When to use each component
Use the bristle brush for scrubbing the inside of reservoirs and wide-mouth containers. The wire tube cleaner is designed for cleaning drinking tubes and bite valves where mold can build up.
Use the Gear Cleaning Tablets for a deep soak after scrubbing, especially if you notice odors or stains. They are safe for all HydraPak reservoirs and soft flasks.
Step-by-step cleaning process
- Disassemble your hydration gear: Remove the drinking tube, bite valve, and any quick-disconnect fittings from your reservoir or soft flask. This allows you to clean each part separately. Don't forget to remove the bite valve – it's a common spot for mold.
- Scrub the reservoir with the bristle brush: Fill the reservoir with warm water and a drop of mild soap. Use the bristle brush to scrub the interior walls, bottom, and corners. Rinse thoroughly. Avoid using bleach or harsh chemicals, as they can damage the reservoir material.
- Clean the tube and bite valve with the wire cleaner: Thread the wire tube cleaner through the drinking tube and push it back and forth to dislodge debris. Do the same for the bite valve opening. Rinse with warm water. If the wire doesn't pass through easily, check for kinks in the tube.
- Deep clean with Gear Cleaning Tablets: Fill the reservoir or soft flask with warm water and drop in one tablet. Let it soak for 15-30 minutes (or as directed on the tablet package). Pour out the solution and rinse thoroughly with clean water. Don't exceed the recommended soak time – longer isn't better and may leave residue.
- Air dry completely before storage: Shake off excess water and hang the reservoir or soft flask upside down with the cap open. Allow the tube and bite valve to air dry separately. Store only when completely dry. Storing damp gear is the fastest way to grow mold and mildew.
Product facts
- Gear Cleaning Kit Bundle: Includes Gear Cleaning Kit and 20 Gear Cleaning Tablets with 3x the cleaning power compared to a standard Bottle Bright tablet. You get a complete cleaning solution in one bundle, saving 10% and ensuring no job is too big for your hydration gear.
Gear Cleaning Kit Bundle
